Venting panels Vent PRO
Explosion venting
Benefits:
- High efficiency and reliability
- Durability
- Cost-effective solution
- Easy to install and replace
- Possibility of selecting opening pressure Pstat
- Large selection of sizes and options
- Wear resistance, shock resistance
- 100% efficiency even with high KSt
For explosion protection:
- Dust filters
- Cyclones
- Bins/silos
- Dryers
- Mills
- Crushers
- Separators
- Any other industrial equipment
Equipment certification
Operating principle of venting panel
Explosion protection of equipment with bursting discs is simple and reliable. During normal operation of the process equipment, the membrane hermetically closes the ventilation hole; in the event of an explosion, a sharp surge in pressure occurs inside the equipment, which, when reaching a value of 0.1 bar, ruptures the explosion-proof panel, releasing excess pressure from the equipment. Thus, the bursting panel protects the process equipment from pressure increases to values dangerous for the equipment.
Optional explosion sensors allow you to stop the technology in a timely manner to avoid repeated dust explosions.
Available models of explosion-proof panel
Vent PRO F
A single-layer, flat venting panel. It is used for explosion protection equipment in which there is no discharge, usually for bucket elevators and vessels.
- Suitable for protection of equipment operating at low working pressure
- For equipment with an operating temperature of up to 100 °C
- Stainless steel
- Built-in mounting flange
- Can be installed on a cylindrical surface
Vent PRO D
A single-layer, convex venting panel. It is used for explosion protection of equipment operating under low discharge, usually for dust collection systems.
- Single-layer design for equipment with an operating temperature of up to 100 °C
- Stainless steel
Vent PRO T
Three-layer, convex ventilation panel, available in rectangular and round design. It is used for explosion protection of equipment operating under high discharge, usually for pneumatic transport and dust collection systems.
- Rectangular and round
- Stainless steel with PTFE insulation
- For equipment with an operating temperature of up to 240 °C
- High resistance to discharge
- Suitable for equipment with pressure pulses
Vent PRO S
Single-layer, convex ventilation panel. It is used for explosion protection of equipment operating under high vacuum, usually for pneumatic transport and dust collection systems.
- Convex single layer
- For equipment with an operating temperature of up to 230 °C
- Built-in mounting flange
- Also suitable for high pressure equipment
- Suitable for food, pharmaceutical and chemical industries
- Stainless steel
ExDoor PUSM
For explosion protection of hoppers.
- Reusable
- Suitable for explosion protection equipment with low working pressure
- Carbon steel with anti-corrosion coating
- Possibility of repeated application
- Suitable for process equipment with very low Pred
DiVEx
Deflectors influence the external flame produced by a vented explosion.
- Opening angle 50°
Available sizes of explosion protection venting panel
| Размер | Площадь сброса (м2) | A – Внешний размер (мм) | B – Внешний размер (мм) |
| 229 x 229 F | 0,05 | 309 | 309 |
| 229 x 305 F | 0,06 | 309 | 385 |
| 260 x 260 F | 0,07 | 337 | 337 |
| 170 x 470 F | 0,08 | 250 | 550 |
| 220 x 540 F | 0,12 | 308 | 628 |
| 270 x 458 F | 0,12 | 350 | 538 |
| 305 x 457 F | 0,14 | 390 | 542 |
| 300 x 500 F | 0,15 | 382 | 589 |
| 410 x 410 F | 0,17 | 490 | 490 |
| 241 x 762 F | 0,18 | 331 | 852 |
| 630 x 310 F | 0,19 | 385 | 705 |
| 580 x 410 F | 0,24 | 500 | 670 |
| 490 x 590 F | 0,28 | 573 | 673 |
| 610 x 470 F | 0,29 | 550 | 690 |
| 600 x 600 F | 0,35 | 656 | 656 |
| 450 x 800 F | 0,36 | 550 | 900 |
| 610 x 610 F | 0,37 | 690 | 690 |
| 500 x 750 F | 0,38 | 580 | 830 |
| 457 x 890 F | 0,39 | 537 | 970 |
| 586 x 920 F | 0,53 | 671 | 1005 |
| 588 x 908 F | 0,53 | 680 | 1000 |
| 800 x 800 F | 0,62 | 850 | 850 |
| 685 x 1100 F | 0,75 | 765 | 1178 |
| 870 x 910 F | 0,79 | 960 | 1000 |
| 920 x 920 F | 0,83 | 1005 | 1005 |
| 915 x 1118 F | 1,02 | 1000 | 1203 |
| 1020 x 1020 F | 1,03 | 1106 | 1106 |
| 1118 x 1118 F | 1,25 | 1202 | 1202 |
| 1130 x 1130 F | 1,28 | 1220 | 1220 |
| 1000 x 2000 F | 2,00 | 1090 | 2090 |
| Размер | Площадь сброса (м2) | A – Внешний размер (мм) | B – Внешний размер (мм) |
| 229 x 229 D | 0,05 | 309 | 309 |
| 260 x 260 D | 0,06 | 340 | 340 |
| 150 x 600 D | 0,08 | 220 | 670 |
| 220 x 540 D | 0,11 | 300 | 620 |
| 305 x 457 D | 0,12 | 375 | 527 |
| 610 x 290 D | 0,16 | 365 | 685 |
| 630 x 310 D | 0,18 | 385 | 705 |
| 490 x 590 D | 0,27 | 565 | 665 |
| 450 x 800 D | 0,34 | 530 | 880 |
| 586 x 920 D | 0,51 | 661 | 995 |
| 2 x 610 x 290 D | 0,32 | 385 | 1385 |
| 2 x 630 x 310 D | 0,35 | 385 | 1385 |
| 920 x 920 D | 0,81 | 995 | 995 |
| 915 x 1118 D | 0,98 | 990 | 1193 |
| 1020 x 1020 D | 1,00 | 1095 | 1095 |
| Размер | Площадь сброса (м2) | A – Внешний размер (мм) | B – Внешний размер (мм) |
| 229 x 229 S | 0,05 | 309 | 309 |
| 260 x 260 S | 0,07 | 340 | 340 |
| 170 x 470 S | 0,08 | 250 | 550 |
| 150 x 600 S | 0,09 | 220 | 670 |
| 220 x 540 S | 0,12 | 300 | 620 |
| 270 x 458 S | 0,12 | 350 | 538 |
| 305 x 457 S | 0,14 | 390 | 542 |
| 300 x 500 S | 0,15 | 382 | 589 |
| 340 x 440 S | 0,15 | 400 | 500 |
| 410 x 410 S | 0,17 | 490 | 490 |
| 610 x 290 S | 0,17 | 365 | 685 |
| 241 x 762 S | 0,18 | 331 | 852 |
| 630 x 310 S | 0,19 | 385 | 705 |
| 490 x 590 S | 0,28 | 565 | 665 |
| 600 x 600 S | 0,36 | 680 | 680 |
| 450 x 800 S | 0,36 | 530 | 880 |
| 610 x 610 S | 0,37 | 690 | 690 |
| 457 x 890 S | 0,4 | 537 | 970 |
| 578 x 851 S | 0,47 | 658 | 931 |
| 586 x 920 S | 0,53 | 661 | 995 | 588 x 908 S | 0,53 | 680 | 1000 |
| 800 x 800 S | 0,64 | 880 | 880 |
| 685 x 1100 S | 0,75 | 765 | 1178 |
| 870 x 910 S | 0,79 | 960 | 1000 |
| 920 x 920 S | 0,84 | 995 | 995 |
| 851 x 1162 S | 0,98 | 931 | 1242 |
| 915 x 1118 S | 1,01 | 990 | 1193 |
| 1020 x 1020 S | 1,01 | 1095 | 1095 |
| 1130 x 1130 S | 1,28 | 1220 | 1220 |
| Размер | Площадь сброса (м2) | A – Внешний размер (мм) | B – Внешний размер (мм) |
| 229 x 229 SU | 0,04 | 309 | 309 |
| 260 x 260 SU | 0,05 | 340 | 340 |
| 220 x 540 SU | 0,10 | 300 | 620 |
| 305 x 457 SU | 0,11 | 375 | 527 |
| 610 x 290 SU | 0,14 | 365 | 685 |
| 630 x 310 SU | 0,16 | 385 | 705 |
| 490 x 590 SU | 0,24 | 565 | 665 |
| 2 x 610 x 290 SU | 0,28 | 385 | 1385 |
| 450 x 800 SU | 0,32 | 530 | 880 |
| 2 x 630 x 310 SU | 0,35 | 385 | 1405 |
| 586 x 920 SU | 0,48 | 661 | 995 |
| 920 x 920 SU | 0,78 | 995 | 995 |
| 915 x 1118 SU | 0,95 | 990 | 1193 |
| 1020 x 1020 SU | 0,96 | 1092 | 1095 |
| Размер | Площадь сброса (м2) | D1 – внутренний размер (мм) | D2 – окружность отверстий (мм) | D3 – внешний размер (мм) |
| DN 250 | 0,05 | 265 | 320 | 345 |
| DN 300 | 0,06 | 315 | 350 | 375 |
| DN 350 | 0,07 | 340 | 387 | 420 |
| DN 400 | 0,10 | 390 | 443 | 475 |
| DN 450 | 0,13 | 445 | 486 | 525 |
| DN 510 | 0,16 | 505 | 550 | 585 |
| DN 600 | 0,24 | 595 | 646 | 675 |
| DN 630 | 0,27 | 625 | 680 | 705 |
| DN 750 | 0,41 | 765 | 817 | 845 |
| DN 800 | 0,47 | 815 | 860 | 895 |
| DN 880 | 0,53 | 875 | 920 | 955 |
| DN 900 | 0,57 | 895 | 955 | 995 |
| DN 1000 | 0,72 | 995 | 1060 | 1095 |
| DN 1100 | 0,87 | 1095 | 1160 | 1195 |
| Размер | Площадь сброса (м2) | A – Внешний размер (мм) | B – Внешний размер (мм) |
| 450 x 800 | 0,36 | 590 | 940 |
Examples of explosion protection of equipment with bursting discs
for your technological process
Our projects
